Audi A5 / S5 / RS5 Coupe & Cabrio (B8) Discussion forum for the B8 Audi A5, S5 and RS5 Coupe and Cabriolet Model years 2009 - 2017

2010 A5 2.0 crank case vent help??

Thread Tools
 
Search this Thread
 
Old 11-11-2013, 07:17 AM
  #1  
AudiWorld Senior Member
Thread Starter
 
jschick's Avatar
 
Join Date: Sep 2003
Location: N.E. Ohio
Posts: 1,139
Likes: 0
Received 0 Likes on 0 Posts
Default 2010 A5 2.0 crank case vent help??

I have a 2010 A5 2.0 TFSI with a crank case vent issue.
when the car warms up it squeels so loud you can't hardly beleive it. I finally figured it is a vent issue. the oil cap is suctioned so tight you can't hardy get it off when the car is running. as soon as you do get it off the squeel stops. any ideas what could be wrong here, I am not at all familiar with the vents system on this engine.
I also am getting miss fire codes now which I guess isn't too suprizing.

any help????
Old 11-11-2013, 11:07 AM
  #2  
AudiWorld Senior Member
 
need_TQM's Avatar
 
Join Date: May 2008
Location: Houston
Posts: 670
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by jschick
I have a 2010 A5 2.0 TFSI with a crank case vent issue.
when the car warms up it squeels so loud you can't hardly beleive it. I finally figured it is a vent issue. the oil cap is suctioned so tight you can't hardy get it off when the car is running. as soon as you do get it off the squeel stops. any ideas what could be wrong here, I am not at all familiar with the vents system on this engine.
I also am getting miss fire codes now which I guess isn't too suprizing.

any help????
Sounds like the same failure that happened to my 2009 A4 2.0T.

http://www.audizine.com/gallery/data/500/repair_21k.jpg
Old 11-11-2013, 04:33 PM
  #3  
AudiWorld Senior Member
Thread Starter
 
jschick's Avatar
 
Join Date: Sep 2003
Location: N.E. Ohio
Posts: 1,139
Likes: 0
Received 0 Likes on 0 Posts
Default

looks like this is it. I assume you just replaced the PCV valve on top the Valve cover??

can you confirm this? or is their some other crank case vent I am not aware of?

thanks
Old 11-11-2013, 07:15 PM
  #4  
AudiWorld Senior Member
 
need_TQM's Avatar
 
Join Date: May 2008
Location: Houston
Posts: 670
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by jschick
looks like this is it. I assume you just replaced the PCV valve on top the Valve cover??

can you confirm this? or is their some other crank case vent I am not aware of?
The dealer replaced the PCV on the valve cover - I didn't do it myself - it was under warranty...

I suppose the primary oil separator (copper color below) could fail, but I think it's far more likely the one on the valve cover is the issue.

You state the noise goes away if the oil filler cap is removed - how about when you apply throttle (reduces vacuum). Mine would stop squealing when I pressed the accelerator quickly to rev it up a bit or when driving and accelerating.

Old 11-12-2013, 08:17 AM
  #5  
AudiWorld Senior Member
Thread Starter
 
jschick's Avatar
 
Join Date: Sep 2003
Location: N.E. Ohio
Posts: 1,139
Likes: 0
Received 0 Likes on 0 Posts
Default

yes when you accelerate it does pretty much go away.
I ordered the updated PCV valve monday but I won't have it till Thurs or maybe friday, so was just checking if their was anything else I may be missing.

thanks
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Roland Bumbuc
Performance and Tuning
1
09-13-2017 03:21 AM
wizo2g1
Florida Discussion
1
04-28-2009 02:19 PM
a4quattro99
1.8T Discussion
2
10-29-2007 11:42 AM
Alf Garnett
TT (Mk1) Discussion
1
07-08-2002 08:52 AM



Quick Reply: 2010 A5 2.0 crank case vent help??



All times are GMT -8. The time now is 12:19 AM.