1/2 done removing my bigest Pet Peeve
#1
AudiWorld Senior Member
Thread Starter
Join Date: Jun 2000
Posts: 1,770
Likes: 0
Received 0 Likes
on
0 Posts
1/2 done removing my bigest Pet Peeve
Stupid tabs on the bottom of the Votex skirts- Left side done-
Right side to be completed next weekend- ( wife gives me about an hour a weekend to do my own crap- LOL)
<img src="http://pictureposter.audiworld.com/6174/img_3421_large.jpg">
<img src="http://pictureposter.audiworld.com/6174/img_3420_large.jpg">
<img src="http://pictureposter.audiworld.com/6174/img_3419_large.jpg">
<img src="http://pictureposter.audiworld.com/6174/img_3422_large.jpg">
<img src="http://pictureposter.audiworld.com/6174/img_3423_large.jpg">
Right side to be completed next weekend- ( wife gives me about an hour a weekend to do my own crap- LOL)
<img src="http://pictureposter.audiworld.com/6174/img_3421_large.jpg">
<img src="http://pictureposter.audiworld.com/6174/img_3420_large.jpg">
<img src="http://pictureposter.audiworld.com/6174/img_3419_large.jpg">
<img src="http://pictureposter.audiworld.com/6174/img_3422_large.jpg">
<img src="http://pictureposter.audiworld.com/6174/img_3423_large.jpg">
#3
NICE! That settles it...I'm having that done.
Looks way better....those tabs have always really bugged me too.
I need to get mine repainted/installed so I'll do it or have the shop do it for me.
How did you do it? Hack saw? Table saw? Kitchen knife? ;^P
I need to get mine repainted/installed so I'll do it or have the shop do it for me.
How did you do it? Hack saw? Table saw? Kitchen knife? ;^P
#4
AudiWorld Senior Member
Thread Starter
Join Date: Jun 2000
Posts: 1,770
Likes: 0
Received 0 Likes
on
0 Posts
Proccedure...........
Used a small hand saw with a very sharp blade. masked off with 2 layers of Blue painters tape,
Cut very slowly leaving about 1/32 of material from the tab.
Sanded off with Orbital sander with 220 grit.
One note- there are 2 mounts on the center of the piece, I just sanded those down as well - no problem
yes it greatly imporves the look-
Cut very slowly leaving about 1/32 of material from the tab.
Sanded off with Orbital sander with 220 grit.
One note- there are 2 mounts on the center of the piece, I just sanded those down as well - no problem
yes it greatly imporves the look-