Spring Question
#1
AudiWorld Member
Thread Starter
Join Date: Apr 2009
Location: Beaverton, OR
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Spring Question
A quick question... Are the OEM suspension springs for a 1985 4000 S (non quattro) and a 1990 80 (non quattro) compatible? Using my iPhone at an airport so may really conducive to digging into the archives. Thanks!
#2
AudiWorld Senior Member
Yes, but as I recall it will lift the car about an inch or so. If that's what you're looking for then go for it. If you just want to lift the rear to match the front you could use 5000 springs, or use front 4000 springs on the back, which is a popular way to get rid of rear droop. Lots of combos out there...
-Rog
EDIT: Er, I guess I should have asked which way you're going, 80 springs on a 4000 or 4000 springs on an 80?
-Rog
EDIT: Er, I guess I should have asked which way you're going, 80 springs on a 4000 or 4000 springs on an 80?
#3
AudiWorld Member
Thread Starter
Join Date: Apr 2009
Location: Beaverton, OR
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
You assumed correctly... 80 springs on the 4000. Car has had two owners, first one for about 28 years and the second for about six months. Current owner cut the springs so it is sitting very low...and I have a set of 80 springs sitting in the garage.
Thread
Thread Starter
Forum
Replies
Last Post
aluminumpork
Audi 90 / 80 / Coupe quattro / Cabriolet
2
04-05-2007 12:19 PM
Clues
A4 (B5 Platform) Discussion
13
08-28-2001 04:56 AM