reverse light and brakes like
#4
AudiWorld Member
Join Date: Aug 2011
Location: Spokane, WA
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Check the connector at the tail light cluster for corrosion. Also follow each of the brass pathways from the harness to each bulb and check for corrosion. I noticed my lights weren't working either, and I found a ton of green corrosion on the contacts. It was bad enough that my cluster was getting hot from the resistance. Use emery cloth or fine grit sandpaper to clean each contact until it's shiny. Then put dielectric grease on the terminals to prevent future corrosion.
Thread
Thread Starter
Forum
Replies
Last Post
theMaab
A6 / S6 (C5 Platform) Discussion
1
05-11-2010 11:05 PM
SpeedCrazie
A6 / S6 (C6 Platform) Discussion
4
02-24-2010 12:51 AM
King13
A4 (B5 Platform) Discussion
0
01-29-2006 03:00 PM