I made these billet aircraft aluminum exhaust tips in my cnc machine shop. What do you think? E-mail me if you are interested.They are 6061 Aluminum and they are anodized for corrosion protection. They are held on by a stainless steel bolt. No cutting or welding is required. I should have a price by 3/4/99. The more I make the cheaper they get.<br>Thanks<br>

Wow,<br>They look great. Could you let me know as well what the price may be. I'm definitely interested. Out of curiosity (if you didn't see my other post), do you think you could make them in a square format, also? Please let me know. I'd be willing to pay alittle more for them, as well.<p>Phil.<br>98 2.8<br>

L:<p>Told you! They do look great.<br>As I said before, email me as soon as you have a price.

Let me know the price.<br>Thanks,<br>Chris

They do look good. Email the price once you have it worked out.<p>LouisE

I need your Email address<br>

1st additional picture...

2nd additional picture...

q

oooohhhh yeeaaaaaahhhh.<p>Count me in too. Let me know when you get a price together.<br>

I had an Integra, and the exhaust tips bolted 'into' the exhaust in the sense that the bolt screwed into the pipe, creating enough pressure to hold on the tips. This worked great, until the exhaust pipe began to rust and the tips began to rattle. The bolt had completely rusted, so I couldn't take it off, and the corrosion on the exhaust pipe kept me from sliding the tip off.<p>Is this the method of attaching these tips?

<br>x

<br>Yes, they are held on the same way, but the materials are different. My tips are anodized aluminum, the set screw that holds the tip is stainless steel, and the A4's stock tips are also stainless steel. All 3 materials will not rust. So when you get your next A4, you can put them on it.<br>Thanks for the question.

I think they would look great on my soon to arrive silver A4 Avant.<br>Please post the price when you get it!

Even though each metal in of themselves will not rust (but all metals corrode, galvanic action occurs between dissimilar metals, some faster than others. Not that in this case its an issue unless you're going to keep the original exhaust system longer than 50 years :).<p>FYI

<br>BILLET ALUMINUM EXHAUST TIPS<br>FOR THE AUDI A4<p>Manufactured from aircraft quality 6061 Aluminum and anodized for corrosion protection. No cutting or welding to the stock exhaust is required. Installation is as easy as slipping them on and tightening the stainless steel set screw.<p> ONLY $59.95 per set<p>Email me and I will forward you an order form.<br>Thank you.<p>I am also working on a price for square tips.