rmz
01-15-1999, 10:16 AM
|
|
|
|
View Full Version : Has anyone used the Neuspeed chip and then later bought the K04 from neuspeed? How much difference in performance? (DonP's site says.. not much) rmz 01-15-1999, 10:16 AM Stefan N 01-15-1999, 10:27 AM <br>. estee 01-15-1999, 11:07 AM could you amplify your comments a bit? tia ErikR 01-15-1999, 11:14 AM Ali 01-15-1999, 12:02 PM You first have to realize that the Neuspeed chip makes about 180hp and the Wett 1 bar makes 200hp. DonP has had problems with his Wett setup and wett has not been able to supply him with a chip that can take full advantage of his turbo. The Neuspeed K04 chip that I have runs about 16psi, and to answer your question, yes there is huge difference in performance between this setup and the NS 0.8 chip alone. <p><br>Ali<br>1.8T 230hp<br> Rich Quinlan 01-15-1999, 04:36 PM The powerband with a K04 extends to about 6500rpm, more than 1000 higher than with a K03.. This would let you run the 1/4 mile traps in 3rd instead of 4th..<p>Also the powerband isn't higher..it just extends further up.. more power across a larger spectrum of RPM's.<p>Comparing peak numbers with peak numbers means almost nothing.. you must look at the graphs, and see the powerband.<p>Rich Quinlan<br>Longing for a bigger turbo<ul><li><a href="http://home.att.net/~richquinlan">Quinland</a></li></ul> |