Hi there,<p>I've just put a Panasonic CX-DP801 into my Audi A3 98. I've used an adaptor<br>lead which goes has three connectors on it. One to the Panasonic CD, one the<br>earth and the other to the DIN connector in the boot. Everything normally<br>plays ok, however sometimes when I turn the car or unit off and then turn<br>it back on again I get the error message CD0 LOAD in the head unit and then<br>have to piss around with the ignition and head unit to get the cd to<br>come back on again.<p>Has anyone seen this problem before ? I'm assuming there may be something<br>wrong with the cable but the guy I got it from says he thinks it's not<br>possible to fix this ?<p>If anything does anyone have the pinouts from the audi and panasonic side and<br>I can double check things ?<p>Thanks,<p>Roy

This resembles the message you get when you put a new magazine full of CDs into the unit (at least on the factory 6-disc changer). Once it reads all the cd's, then it goes on to play the first one. You can't do anything with it until it reads all the cd's.<p>So my suggestion for when this happens is to wait at least a minute and see if it clears itself before you do whatever it is you do to the ignition and head unit. The problem might clear itself.<p>Good luck.<br>