Did anyone ever figure out a sure-fire replacement for the halogen fog bulbs to led's? I had enough of the bulb out warnings when I put in the rs6 headlamps till I got the coding correct.

Thanks!
Bob

Did anyone ever figure out a sure-fire replacement for the halogen fog bulbs to led's? I had enough of the bulb out warnings when I put in the rs6 headlamps till I got the coding correct.

Thanks!
Bob

Anybody???? I couldn't find the old thread on this so i hope someone has done it.

Anybody???? I couldn't find the old thread on this so i hope someone has done it.

One last try...has anyone done this yet without resistors?

I don't have any warning with my RS6 headlamps... what is the problem for you?

One last try...has anyone done this yet without resistors?

I looked at doing this but I couldn't find a set of LED H11 bulbs that I felt were good quality. I'm probably going to take the HID route.
http://oemplus.com/index.php?main_page=product_info&cPath=60_74_151&products_id=1377

I don't have any warning with my RS6 headlamps... what is the problem for you?

I didn't get the converted ones. I did it the old fashioned way, rewiring and coding. I thought our cars took the H7 bulb in the fog. I am also going to wire in the RS6 fog on a relay. Krusty, did you hook up your fogs in the headlamps with yours in the lower grilles? What bulb in the h/l fog so it doesn't look too yellow with the led's fired?

Thanks,
Bob

I thought it was H7 also... Anyone have comments or pics of H7s

I have the square ones (2009MY) and according to the Sylvania chart, it takes H11. Previous versions show H7.

I didn't get the converted ones. I did it the old fashioned way, rewiring and coding. I thought our cars took the H7 bulb in the fog. I am also going to wire in the RS6 fog on a relay. Krusty, did you hook up your fogs in the headlamps with yours in the lower grilles? What bulb in the h/l fog so it doesn't look too yellow with the led's fired?

Thanks,
Bob

Are you talking about the instructions he sent with the rs6 headlight called "Wire connecting for parking light in front bumper with headlights connector for US cars For AUDI A6 2004-2010"? The PDF document with 2 little cables/pins ?

If so, i didn't do it yet because i didnt receive the cables/instructions at first. I had to ask few questions.

Also, leds on one headlight stopped working. I had to send it back to Poland... 133$ shipping, ouch!

He didnt receive it yet... Will re-install everything next summer

Are you talking about the instructions he sent with the rs6 headlight called "Wire connecting for parking light in front bumper with headlights connector for US cars For AUDI A6 2004-2010"? The PDF document with 2 little cables/pins ?

If so, i didn't do it yet because i didnt receive the cables/instructions at first. I had to ask few questions.

Also, leds on one headlight stopped working. I had to send it back to Poland... 133$ shipping, ouch!

He didnt receive it yet... Will re-install everything next summer

No, I bought oem ones from a European Audi dealer. Now I am looking to get a RS6 bumper/spoiler and lower grilles. You think the $133. was bad for shipping.......

See fitting problems/solutions for RS6 bumper

I tought about it and then changed my mind

http://www.motor-talk.de/forum/hilfe-rs6-stossstange-anpassen-0-5-spalt-t3263986.html

See fitting problems/solutions for RS6 bumper

I tought about it and then changed my mind

http://www.motor-talk.de/forum/hilfe-rs6-stossstange-anpassen-0-5-spalt-t3263986.html

Link won't work. A friend of mine has changed them out. Said it doesn't fit as the lower corner of the a fender is pointed and the rs fender is rounder. My body guy said this will pose no problem to modify. Unless there is something else going on. I'll try to get fitment pictures.

Ok, link is working for me, maybe you need to be a member.

Post some pictures as soon as available

I should have used that option, i bought the 2011 s-line front end... anybody needs one? :)