herasymcuk
02-07-2011, 06:46 AM
Good evening. I have an A1 Audi 1.4 TFSI S-Tronic. I installed the APS (Audi parking system plus) and I need to activate it. The instructions in my possession, however, refer to the SEA. I sent a ticket to Kufateck for help, saying that I have the VCDs 10.6. They said that the following actions: Select - --e "Can Gateway 19-"----" Installation list. Then you should open a window where you select the new unit "10-parking assist. " Then go to Select ..... and then enter the unit "10-Steer/Parking assist" - - - - coding --- ---- new coding and enter the numeric value. However, there is a problem ..... in the "19-CAN gateway, there is no installation list with the units to be selected. There are the usual buttons (coding, coding 2, long adaptation). I would ask you how you can Uwe@Ross-Tech.com get to that window. From the main menu I can go in and find Autoscan "Gateway installation list"! But this is only a list of units installed in the machine at that time. Thank you for your attention and sorry for my English.
Uwe@Ross-Tech.com
02-07-2011, 04:49 PM
Please post a complete Auto-Scan from this car using the current release 10.6.3.
-Uwe-
herasymcuk
02-07-2011, 11:01 PM
Chassis Type: 8X0
Scan: 01 02 03 08 09 15 16 17 19 25 42 44 46 52 55 5F
VIN: WAUXXXXXXXXXXXX
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Xenon Range -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (BK2-CAXA) Labels: None
Part No SW: 03C 906 016 BH HW: 03C 906 016 BG
Component: 1.4l R4/4V TS H07 7768
Revision: LEH07--- Serial number:
Coding: 00250012000401000000
Shop #: WSC 00046 790 00000
ASAM Dataset: EV_ECM14TFS01103C906016BH 001006
ROD: EV_ECM14TFS01103C906016BH.rod
VCID: 66C8B4C66E3DDB2C
No fault code found.
Readiness: 1110 0101
-------------------------------------------------------------------------------
Address 02: Auto Trans
Cannot be reached
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: Redir Fail!
Part No SW: 6R0 907 379 AH HW: 6R0 907 379 AH
Component: ESP8.2i front H07 0004
Revision: --------
Coding: 310448E9236E00B98C2A12EAC4D300510D00
Shop #: WSC 00046 000 00000
VCID: 840C0E4EF841893C
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: None
Part No SW: 8X0 820 043 A HW: 8X0 820 043 A
Component: Klima 1 Zone H12 0050
Serial number: 00000000009717
Coding: 6400080000
Shop #: WSC 00046 790 00000
ASAM Dataset: EV_AirCondiFrontAU210 006031
ROD: EV_AirCondiFrontAU210.rod
VCID: 326018969275778C
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: None
Part No SW: 8X0 907 063 A HW: 8X0 907 063 A
Component: BCM PQ35 M 107 0615
Revision: 00107 AM
Coding: 06000A2FA0051800201840E02100094C537F720A21EF5922E4 0887870045
Shop #: WSC 00046 000 00000
VCID: 3A7030B64A058FCC
Part No SW: 8K0 955 559 HW: 8K0 955 559
Component: RLS H04 0003
Coding: 02562D
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: None
Part No SW: 8X0 959 655 HW: 8X0 959 655
Component: Airbag10.41 H03 0007
Revision: -------- Serial number: 003DM000HBAX
Coding: 30314539303330303032554A304C38583053
Shop #: WSC 00046 000 00000
ASAM Dataset: EV_Airba1041BPAAU210 001012
ROD: EV_Airba1041BPAAU210.rod
VCID: 0716994249772224
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels: None
Part No SW: 8X0 953 501 B HW: 5K0 953 569 H
Component: LENKS.MODUL 009 0136
Revision: FF010E15 Serial number: 20100902200053
Coding: 1994004000
Shop #: WSC 00046 790 00000
ASAM Dataset: EV_VW360SteerWheelUDS A03004
ROD: N/A
VCID: 39722FBA4F0384D4
No ASAM data for: "EV_VW360SteerWheelUDS" ()
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: None
Part No SW: 8X0 920 930 HW: 8X0 920 930
Component: KOMBI H05 0123
Serial number: 00000000000000
Coding: 11DE00
Shop #: WSC 00046 790 00000
ASAM Dataset: EV_Kombi_UDS_VDD_AU10 A04086
ROD: N/A
VCID: F7F66982B997D2A4
No ASAM data for: "EV_Kombi_UDS_VDD_AU10" ()
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: None
Part No SW: 8X0 907 468 A HW: 8X0 907 468 A
Component: GAT 4CAN 1L M H04 0083
Revision: 1C060023 Serial number: 2341C10726808B
Coding: FBCF0064000100010053
Shop #: WSC 00046 000 00000
VCID: 438E4D523DCFCE04
Part No SW: 8K0 915 181 G HW: 8K0 915 181 G
Component: J367-BDM H07 0150
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: None
Part No SW: 8X0 920 930 HW: 8X0 920 930
Component: IMMO H05 0123
Serial number:
Coding: 000002
Shop #: WSC 00046 790 00000
ASAM Dataset: EV_Immo_UDS_VDD_AU10 A04008
ROD: N/A
VCID: F7F66982B997D2A4
No ASAM data for: "EV_Immo_UDS_VDD_AU10" ()
No fault code found.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386) Labels: None
Part No SW: 8X0 959 793 C HW: 8X0 959 793 C
Component: TSG FA H09 0409
Revision: -------- Serial number: --------------
Coding: 011E02201000120102
Shop #: WSC 00046 000 00000
VCID: 4D9A6B6AEB8B0874
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 6Q0-423-156.lbl
Part No: 6R0 423 156 B
Component: LenkhilfeTRW V277
Coding: 11251
Shop #: WSC 00046
VCID: 2F6611E281475A64
No fault code found.
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387) Labels: None
Part No SW: 8X0 959 792 C HW: 8X0 959 792 C
Component: TSG BF H09 0409
Revision: -------- Serial number: --------------
Coding: 011E02201000120102
Shop #: WSC 00046 000 00000
VCID: 4C9C666E1091017C
No fault code found.
-------------------------------------------------------------------------------
Address 55: Xenon Range (J431) Labels: None
Part No SW: 8X0 907 357 HW: 8X0 907 357
Component: ****LWR12**** H02 0031
Serial number: 100831-0004-003
Coding: 1131941010022500
Shop #: WSC 00046 790 00000
ASAM Dataset: EV_HeadlRegulBasic 005001
ROD: EV_HeadlRegulBasic.rod
VCID: FF0681A291A7EAE4
No fault code found.
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels: None
Part No SW: 8X0 035 192 A HW: 8X0 035 192 A
Component: RMC Cnct Nav H44 0417
Coding: 01000000008051070023000103010000000000
Shop #: WSC 00191 264 92103
VCID: 356A238A631B60B4
Part No: 8X0 919 884 C
Component: P11-50-10.06 1006
Part No SW: 8X0 919 603 HW: 8X0 919 603
Component: DU6 Basic H42 0084
No fault code found.
End ---------------------------------------------------------------------
This autoscan is made with VCDS 10.6
If i go to 19-can gateway, I find the button "basic functions" in the place of the "installation list" button.
I need to find this window: http://www.ross-tech.com/vcds/tour/908/gateway-coding.png to select the new ecu and then to coding it!
Help me please :)
Theresias
02-08-2011, 07:21 AM
This autoscan is made with VCDS 10.6
If i go to 19-can gateway, I find the button "basic functions" in the place of the "installation list" button.
I need to find this window: http://www.ross-tech.com/vcds/tour/908/gateway-coding.png to select the new ecu and then to coding it!
Help me please :)
We've just published a new beta version which does contain a fix for this issue, therefor feel free to update to Beta 11.2 which is available on our website - as usual for free for our customers.
http://www.ross-tech.com/vcds/download/beta/current.html
However, I doubt that you will be able to use that version because based on what we see from the scan you posted you were not using Release 10.6.3 but instead an older version which was probably pirated. I am certain you can understand that we do have no intention to help people using illegal copies of our product.