Comments after subheadings indicates if the Dealer (Audi) reset my changes as part of their “Car Scan”. Which means I had to redo the coding. I am using Ross-Tech VCDS Version 908.1. The last item I haven't tried yet (Just found it), but it looks real promising.

Voice Command: Not Active After Visit to Dealer
1. Electronics 2
2. Block 5F
3. Coding – 07
4. Long Coding Helper
5. Change last five digits to read "10000"
6. Exit
7. Do It!!
8.Change Language (Several times, may need to let sit overnight)
Did not have to do language changes after visit to dealer, just
recoded Step 5

Video in Motion: Still Active After Visit to Dealer
1. Electronics 2
2. Block 5F
3. Advanced ID
4. Obtain “Serial Number” of head unit
5. Using online code breaker at:
"http://trick77.com/tools/mmi3g_vimcode.php" obtain a code to be
used in Step 7
6. Security Access - 16
7. Enter code obtained in step 5 (07029 for my S5) (03035 for my A6)
8. Do It!!
9. Adaptation - 10
10. Channel 48; Change value to 255
11. Test
12. Save
13. Done, Go Back
14. Restart MMI (SETUP, BIG BUTTON, UPPER RIGHT SOFT BUTTON together)

Activate Ability to Enter Hidden Menu: Still Active After Visit to Dealer
1. Electronics 2
2. Block 5F
3. Adaptation Channel 6 ; Change value 0 to 1
4. Test
5. Save
6. Done, Go back

Battery Level Indicator: Not Active After Visit to Dealer
1. Press “CAR” and “SETUP” together and hold 6 seconds until Hidden
Menu shows up
2. Select “Car”
3. Select “carextdevicelist”; check “Battery”; press return
4. Select “carmenuoperation”; Set “battery” value to 5
5. Exit hidden menu by restarting MMI (Press SETUP, BIG KNOB, and top
right soft button together)

Open/Close Windows by Remote: Not Active After Visit to Dealer
1. Common
2. Block 46 (Cent. Conv.)
3. Long Coding Helper
4. Comfort Operation: Check “Remote Control active”
5. Exit
6. Do It!!

Seat Belt Chime: Not Active After Visit to Dealer
1. Electronics 1
2. Block 17
3. Coding – 07
4. Long Coding Helper
5. “Arrow down” until “Seat Belt Warning active” shows
6. Open block and select “Seat Belt Warning inactive”
7. Exit
8. Do It!

Lap Timer: Not Active After Visit to Dealer
1. Electronics 1
2. Block 17 Instruments
3. Coding – 07
4. Long Coding Helper
5. Arrow down and check “Lap Timer active”
6. Exit
7. Do It!!

Change default Audi Drive Select: Not Yet Attempted
1. Common
2. Block 09 Cent. Elect
3. Security Access – 16
4. Adaptation – 10
5. Set Channel s 63, 64, 65, and 66 (all of them) to 1, 2, 3, or 4
Where 1=Comfort, 2=Auto, 3=Dynamic, 4=Individual

These sequences were obtain from several sources (see references). I DO NOT TAKE ANY RESPONSIBILITY FOR ANYTHING YOU DO TO OR FOR YOUR CAR. I PROVIDE THIS INFORMATION FOR INFORMATIONAL PURPOSES ONLY.

References:
http://a6retrofit.tripod.com/articles/a5vagcodes.html
http://www.audizine.com/forum/showthread.php?349092-VCDS-coding-of-Audi-Drive-Select-default-setting
http://trick77.com/tools/mmi3g_vimcode.php (Security Code Generator)
http://audiforum.us/mmi/13459-change-sds-language-mmi-3g.html
http://www.a5oc.com/forums/showthread.php/check-oil-2909/index.html?p=32223

My car just REFUSES to learn Open/Close Windows by Remote.
I tired it 3 times and it just wont work!!!!!!!!!!!!!!

One you may have missed that I did - LED at full brightness with parking lights on.
Let you drive with the LEDs and fog lights (I would post the codes - but i'm on my work comp, don't have them)

My car just REFUSES to learn Open/Close Windows by Remote.
I tired it 3 times and it just wont work!!!!!!!!!!!!!!

One you may have missed that I did - LED at full brightness with parking lights on.
Let you drive with the LEDs and fog lights (I would post the codes - but i'm on my work comp, don't have them)

Post em when you get home!

Good post for those looking for VagCom codes.

BTW, if anyone is in Houston and needs access to a VagCom, let me know via PM.

I have a question for you, what is the Valet Mode you can activate via VAG-COM? Does that actually do anything.. And have any of you adjusted the range of your headlights as I have lowered my car and they seem a bit low. And last question, my side lights work only when I leave the blinker in either left or right and turn the car off. This is EUropean style setup, but any coding to change to have them light up with the LEDs.. THanks in advance.

Michal

Post em when you get home!

STG 09 – Cent. Elect.
STG Coding -> Long Coding Helper -> Byte 3

Bit 2 - LEDs remain at full brightness with parking lights (1 = active)
Bit 7 - Turn off LED-strip DRLs with indicators (1 = active)