Head gasket R&R is underway....
#1
AudiWorld Junior Member
Thread Starter
Join Date: Jun 2009
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Head gasket R&R is underway....
I got the head pulled this weekend. Not too terrrible of a job, I think it took me abuot 6 hours working 2 or 3 hours at a time off and on. I'm going to try to post a picture - not sure I know how to do this??
Anyone got any words of wisdom on the install? I am leaning toward stock head bolts instead of studs - I don't plan on taking it apart again? Is the procedure to install the stock head bolts really to torque them then go 180 degrees?
[[Image:Head.jpg]]
Anyone got any words of wisdom on the install? I am leaning toward stock head bolts instead of studs - I don't plan on taking it apart again? Is the procedure to install the stock head bolts really to torque them then go 180 degrees?
[[Image:Head.jpg]]
#3
AudiWorld Super User
#4
AudiWorld Junior Member
Thread Starter
Join Date: Jun 2009
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I'll try this picuture thing again - I got a mess!!!!
Head gasket R&R is moving along slowly. The head is at the head shop getting decked and pressure checked. I have parts on the way - hoepfully I get a chance to put it back together before I forget where all this stuff goes!!!!!!!!1
Thread
Thread Starter
Forum
Replies
Last Post
uble1234
A6 / S6 (C6 Platform) Discussion
14
10-23-2020 08:07 PM
random512
A6 (C7 Platform) Discussion
27
04-15-2019 10:45 AM
bballfreak
A6 / S6 (C6 Platform) Discussion
9
04-14-2019 06:59 PM
hardipk5
Audi 90 / 80 / Coupe quattro / Cabriolet
4
10-02-2015 08:32 PM