tpierce
07-11-2007, 08:18 PM
It's another 2004 Honda VFR, same year as my last one, this one used with more mods (seargent seat, Givi windscreen, throttle lock, bar risers), i added the Staintune exhast off my old bike, and i have the OEM hard bags for it, too.
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02634.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02638.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02639.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02642.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02643.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02648.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02649.jpg">
Now, here is the problem. When i bought the bike, i noticed it sat lower than my old bike, the PO lowered the bike...
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02647.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02644.jpg">
So, i got to work raising it back up
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02651.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02654.jpg">
Once raised back up, the risers hit the tank at anything near full lock...so they had to go. And to remove them, i have to reroute the line going from the clutch master cylinder to the slave cylinder...
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02663.jpg">
that line
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02664.jpg">
which means the fairing must come off so i won't spill brake fluid on it and so i can get to the bleed screw.
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02658.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02660.jpg">
Once finally done and put back together.
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02667.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02668.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02672.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02673.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02634.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02638.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02639.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02642.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02643.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02648.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02649.jpg">
Now, here is the problem. When i bought the bike, i noticed it sat lower than my old bike, the PO lowered the bike...
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02647.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02644.jpg">
So, i got to work raising it back up
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02651.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02654.jpg">
Once raised back up, the risers hit the tank at anything near full lock...so they had to go. And to remove them, i have to reroute the line going from the clutch master cylinder to the slave cylinder...
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02663.jpg">
that line
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02664.jpg">
which means the fairing must come off so i won't spill brake fluid on it and so i can get to the bleed screw.
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02658.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02660.jpg">
Once finally done and put back together.
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02667.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02668.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02672.jpg">
<img src="http://i150.photobucket.com/albums/s86/tpierce0000/DSC02673.jpg">