HoustonA5
08-20-2008, 07:18 PM
Hey Guys,
I installed the spring-loaded trunk hooks (like in the A6) into my A5. Didn't take long. With the right nuts [US part number is: N-909-946-01 (Part Description: "Nut")] and some drywall style short screws (1 inch), the install took 15 minutes. I've attached pics of the hardware, hooks, and before and after. I removed the silver netting from the hooks easily for a cleaner look. The link below is for the hooks from Oempl.us.
Step 1. Slip nuts, using needle nose pliers, into square pre-punched holes.
Step 2. Align holes on hook and tighten screws using Torx bit
Step 3. ENJOY!
<img src="http://www.ewethehumanity.com/audi/hardware3.jpg">
<img src="http://www.ewethehumanity.com/audi/hardware1.jpg">
<img src="http://www.ewethehumanity.com/audi/hook.jpg">
<img src="http://www.ewethehumanity.com/audi/trunk1.jpg">
<img src="http://www.ewethehumanity.com/audi/installed.jpg"><ul><li><a href="http://oempl.us/index.php?main_page=product_info&products_id=41">Hooks from Oempl.us</a></li></ul>
I installed the spring-loaded trunk hooks (like in the A6) into my A5. Didn't take long. With the right nuts [US part number is: N-909-946-01 (Part Description: "Nut")] and some drywall style short screws (1 inch), the install took 15 minutes. I've attached pics of the hardware, hooks, and before and after. I removed the silver netting from the hooks easily for a cleaner look. The link below is for the hooks from Oempl.us.
Step 1. Slip nuts, using needle nose pliers, into square pre-punched holes.
Step 2. Align holes on hook and tighten screws using Torx bit
Step 3. ENJOY!
<img src="http://www.ewethehumanity.com/audi/hardware3.jpg">
<img src="http://www.ewethehumanity.com/audi/hardware1.jpg">
<img src="http://www.ewethehumanity.com/audi/hook.jpg">
<img src="http://www.ewethehumanity.com/audi/trunk1.jpg">
<img src="http://www.ewethehumanity.com/audi/installed.jpg"><ul><li><a href="http://oempl.us/index.php?main_page=product_info&products_id=41">Hooks from Oempl.us</a></li></ul>