win
02-12-2008, 11:03 AM
And will this be an x-pipe system by any chance?
TIA.
TIA.
|
|
|
|
View Full Version : Does anyone have an ETA on non-resonated Milltek exhaust? win 02-12-2008, 11:03 AM And will this be an x-pipe system by any chance? TIA. NINEZeRO 02-12-2008, 11:31 AM btw would the non resonated ones increase more hp then the resonated ones by any chance? also, will removing cats do anything? rs4-380 02-12-2008, 12:06 PM if you want it that badly. Won't give much more power, but will make long trips loud. Removing the cat's won't do much either except be a federal crime and cause the ecu to throw check engine lights Europa 02-12-2008, 12:24 PM Yes, removing cats will add power, perhaps noticeably. If someone told me it added 10-20HP I wouldn't be surprised. But *don't* do it - just get smaller/race cats. Apparently, the cats on our cars are massive and restrictive. Quattrings 02-12-2008, 12:44 PM Came close but they sold out of them in the U.S. so ended up doing my own thing. FinallyS5 02-12-2008, 02:16 PM sizzle 02-12-2008, 04:28 PM I ordered a one day delivery of the Magnaflow X Pipe. I'm gonna try the stock Milltek first, and if I don't like it I will cut the resonators and add the x-pipe. Quattrings 02-12-2008, 04:29 PM sizzle 02-12-2008, 04:50 PM the magnaflows are 2.25, 2.5, or 3. I'm going to have to find a metric x-pipe or i'm screwed.... win 02-12-2008, 05:11 PM Where's the cheapest source for the milltek you've found thus far? And what are the differences between the "Jet" style and "Special" style tips? sizzle 02-12-2008, 05:13 PM will get you the exhaust. The jet tips look wimpy because they are rolled like a stock exhaust. The special are angle cut and look more aggressive. Quattrings 02-12-2008, 05:25 PM I didn't know that the Milltek was running similar sizing as factory. Either the factory system is just about perfect, or maybe Milltek didn't want to risk going too aggressive with larger diameter tubing. win 02-12-2008, 06:47 PM Anyone, with any other leads? Wish there were more options available...guess I have to just sit and wait. rs4-380 02-12-2008, 09:20 PM sizzle 02-13-2008, 03:08 AM sizzle 02-13-2008, 03:11 AM win 02-13-2008, 10:56 AM I got one! From Stratmosphere...someone bailed out on their original order. I'm happy now. win 02-13-2008, 12:19 PM Why not just straight pipe? That's what I am going to do to the Milltek (in place of the resonators). I got the last "special-tips", someone bailed on their original order! Can't wait! sizzle 02-13-2008, 02:49 PM I get alot of drone in the cabin even in 6th gear and under 3k rpm. I am gonna try an x-pipe and if that doesn't work i'm gonna go full custom.... win 02-13-2008, 04:07 PM Can you record a sound clip? The guys at stratmosphere told me there wouldn't be any droning at all from removing the resonators... How was the sound (w/ resonators) compared to the stock exhaust? sizzle 02-13-2008, 06:10 PM about two hours after the install the sund deepened and the drone inside the cabin is gone. I will post a video very soon... RoninWheels 02-14-2008, 01:48 PM i'll keep you guys informed if anything changes. |