<center><img src="http://www.velocitymotoring.com/images/v710_img3.jpg"></center><p>Been eyeing this set of rims, and I know the B7 RS4s are 5x112. Looking at offset 33 with 5 or 8 mm spacers, but I have no idea what the centre bore is : 57.1 mm or 72.6 mm?<ul><li><a href="http://www.velocitymotoring.com/links/wheels_v710.htm">http://www.velocitymotoring.com/links/wheels_v710.htm</a</li></ul>

If you want them to line up like the stock wheels, you need a 22mm offset with 8.5" wheels, which translates to a 13mm spacer. A 15 or 20mm spacer would work best.

72.6mm centerbore seems large. I'm willing to bet it is 57.6. Just measure one of your stock wheels.

Check these out.<ul><li><a href="http://www.audizine.com/forum/showthread.php?t=260303">http://www.audizine.com/forum/showthread.php?t=260303</a</li></ul>

See the URL. The only thing not right is the offset, from that I can see

They told me that the 9.5" width was not available in an Audi bolt pattern. That was a few months ago, however. Maybe things have changed. if you are going just by the info on their website, however, it is very misleading.

I wonder if they would do one-offs :)

Yes,you are correct. Your center bore is 57.1mm.

Since we also make them for BMWs, we also have their center bore size, which is 72.6mm :)

thanks.

-Don