PDA

View Full Version : anybody know whp for a fwd 2.8 (a6...even though i dont think it matters)

a_o_smith
12-11-2004, 03:53 PM
BHase
12-11-2004, 04:11 PM
But if you find it, let us know, please.

Ben
a_o_smith
12-11-2004, 07:02 PM
BHase
12-11-2004, 09:24 PM
Gary
12-12-2004, 05:09 PM
<center><img src="http://pictureposter.audiworld.com/157/pre_install_dyno.jpg"></center><p>
Only mod at the time was a Milltek Exhaust.

GaryJ
BHase
12-12-2004, 05:55 PM
2.8whine
12-13-2004, 08:57 AM
What? you have 228whp with just lemmwinks? and your quattro? that would be nuts
Gary
12-13-2004, 11:10 AM
<center><img src="http://www.pes-tuning.com/Merchant2/graphics/dyno/g2_dyno.jpg"></center><p>Attached is a graph from PES of the before/after dyno plots upon installing a S/C kit. If you look at the before measurements, you'll see my car was in the same ballpark. I've seen several other dynos of a 30V w/ various mods and my car falls right in the average.

GaryJ
Gary
12-13-2004, 11:23 AM
IllWil
12-13-2004, 01:24 PM
a_o_smith
12-13-2004, 05:27 PM
(ex: additive timing etc)
a_o_smith
12-13-2004, 05:41 PM
it peaked really early as i remember and stayed there until about 5k, then fell off
Gary
12-13-2004, 06:21 PM
You being the only person I know of running a piggy-back on a stock 30V, I'm curious to see any kind of benchmark of the results. Do you have a vag-com? What's your MAF readings top out at?

GaryJ
a_o_smith
12-14-2004, 08:32 PM
manualAvant
12-16-2004, 08:29 AM
a_o_smith
12-16-2004, 07:07 PM