PDA

View Full Version : I'm putting stoptechs on my S6, what to do with old calipers....

CEB
05-12-2005, 02:24 PM
rotors and pads. The rotors and pads have about 2k miles on them.

Can I use them on the rear? Should I sell them?
LCP
05-12-2005, 06:21 PM
...among other reasons, they're way too heavy to think about using on the rear.
CEB
05-13-2005, 06:59 AM
ryans4
05-13-2005, 08:03 AM
the A6 4.2 and S6 have a differnet HP2 front setup then the B5 S4 / A6 2.7t / Allroad 2.7t.

The rotor offset is greater. I don't know if they compensate for this in the caliper casting, or just in the floating aspect.

But the discs are most definitely NOT the same.
LCP
05-13-2005, 11:51 AM
CEB
05-15-2005, 04:54 AM
...aside from another S6 and (i suspect) a 4.2
bar1
05-15-2005, 12:30 PM
search here:
http://www.brembo.com/ENG/Market/Catalogue/SearchCars.htm
Brembo reference number: 09.7728.10 and 09.7728.11
ryans4
05-16-2005, 07:26 AM
...you'd have to compare part numbers to be sure, but from my catalog:

S4 Caliper Left = 4B0 615 107 A
Allroad 2.7t Caliper Left = 4B0 615 107 A
A6/S6 Caliper Left = 4B0 615 107 B
LCP
05-16-2005, 07:33 PM
CEB
05-17-2005, 04:00 AM