02-09-2009, 07:12 AM
currently running 8mm (f) and 12mm (r) with my S-Line 18s.
putting on my new OZ Ultraleggeras 19x8 et35 soon. ultimately, i'd like to push the tires/wheels out as close to the edge without rubbing.
from what i can gather, because these are 8" width, the 8mm might work up front, but not sure about the 12mm for the rear.
any thoughts? thx.
02-09-2009, 08:26 AM
Maybe in the the back, MAYBE.
Here's mine without any spacers.
02-09-2009, 11:55 AM
<center><img src="http://pictureposter.audiworld.com/224/bbsre7.jpg"></center><p>When I had 18x8 BBS REs on my car with an ET of 35 they stuck out nowhere NEAR that far with a 235 tire on there. This is the best shot I could find, doesn't really make my point though.
02-09-2009, 02:55 PM
I wanted some protection :)
Even if I had 235s, I wouldn't want anything more than maybe a 5mm spacer up front, any more and it would be sticking out. The 12mm in the back might work though.
02-09-2009, 06:49 PM
02-09-2009, 07:34 PM
Do you have clear corner headlamps? It appears so on the pics. If so, where can I get my hands on some. Thx.
02-09-2009, 08:22 PM
Here's where to buy a set... <a href="http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi/?html=learnmore.html&productID=11115">ESCtuning</a>
02-10-2009, 09:27 AM
... I don't think it would take nearly as long to do it the second time around.
And the aesthetic improvement to the front end is well worth the effort.
02-12-2009, 07:28 AM
look him up and check out his profile pics