TSLAV26
01-18-2006, 08:10 PM
I plan on putting on the apr/stasis streetsports. Anything i should know before i order?
Thank you in advance
Thank you in advance
|
|
|
|
View Full Version : What corrections you need with coilovers? Camber, allignment, etc. TSLAV26 01-18-2006, 08:10 PM I plan on putting on the apr/stasis streetsports. Anything i should know before i order? Thank you in advance FCastigl 01-18-2006, 08:51 PM danfrompa 01-19-2006, 08:43 AM If you are getting the coilover, think about getting PSS9 for B7 S4. (That's right B7 S4, not A4). I know it's $500 more than Stasis Street CO but I like it's ability to adjust dempening and rebound after the install is done. The Stasis Street one is just like Koni Sports shock and struts where you can only adjust at the install time. Which means, you won't be able to adjust without taking the suspension apart. I have KONI shocks and struts along with H&R sport springs. I know I will be getting PSS9 this summer... NJ1.8 01-19-2006, 10:22 AM I set the ride height pretty low, close to about 1-.5 finger gap around, and the car has some pretty serious negative camber which makes a huge difference in the turns but may also add some extra wear to the tires. I installed them and then waited a week or so for the springs to settle and then I got an alignment. I'm thinking when spring rolls aound and I get a set of wheels, i'm going to raise the car back up a little and to make sure I dom'y run into any rubbing issues. TSLAV26 01-19-2006, 01:24 PM danfrompa 01-19-2006, 07:49 PM So I rather take a littl stiffer progressive springs from the S4. If you buy ones for B6 A4, the front might be a little lower (again with progressive springs). You can adjust the perch to even out the heights but I like the idea of having the a little more springs..... It is less bouncier that way......... |