I am interested in purchasing the hartman RS4-DTM replica wheels from Hartmann, while speaking with Bill, he informed me that they would be receiving a shipment of wheels in about 45 days and they would be receiving only the +35 offset wheels. I was wondering if any of you have experience with these wheels and if the following set-up would work for my 2005 3.2. I do not want the wheels to stick out of the fenders.

Here is the wheel image, the set-up follows.

<img src="http://www.hartmannwheels.com/site/products/wheels/audi/Hartmann_250x250_Audi_DTM_007_19.JPG">

Wheels- 19x8 +35 offset
Tires- ContiSport 255/35 19

I also would be lowering the car via H&amp;R springs &amp; Koni FSC shocks.

Thanks in advance for the input,

probably be a little better but I was running 20x9 A8 replica's with a 35mm ET &amp; it matched the fenders perfectly! However, the front rubbed on occasion. My car was also lowered with this setup so take into consideration the larger diameter of my rim/tire setup &amp; with you losing an inch on diamter &amp; depth running a 19x(8) instead of 19x(9) you should ok.