I just wanted to get some ideas from everyone on what my mods might be worth if I were to sell them. As you may or may not know, I recently purchased a new (to me) Audi. Also, would it be best to sell to one lucky person as a complete kit, or sell them individually? Here's what I have.

-Mance Velocity Stack <font color="red">SALE PENDING</font>
-Mance RS3MAF <font color="red">SALE PENDING</font>
-Mance XTB
-DIY 3" hose kit with Mance Recovery Sleeve, hose joiners, swedish clamps, DIY breather hoses and an extra piece of straight silicone in case you need it.

Everything is still on the car right now and I will need core exchanges on the MAF and TB. I also have the following non-12v related parts for an A4 that I would like input on value.

-Sport steering wheel with airbag
-Two-piece Depo projector headlights
-99.5+ OEM foglights with grilles
-99.5+ OEM taillights
-Concert Radio with Dension Icelink (would like to trade for a Delta with a radio code. I don't have the code for my Delta).

VS: $40
MAF: $240+core
TB: $330+core
RS: $140

I think I spent around $220 on those parts.

I wouldn't expect to get anywhere near what you paid for it back, given that its just silicone and hose clamps.

Do you have the HVRS (flared) or just the standard? I'd say $140-150 for the flared version, and $100-120 for the other.

How much would you be looking to get for them and what is involved as far as installation on a 97?

he said $800 for the whole kit. i find that a great price. unfortunatly i dont have spare cash.

splines changed after that.

i.e. you can't use a '00 steering wheel on ouf '96 and '97 A4s.

or you can run a dedicated circuit so they can be turned on independent of the head lights. That's what I did, but you need to check your local laws regarding this kind of thing. For the physical installation of just the lights themselves, I followed the tech article that is linked below.

There are Depos on Ebay selling for $75 each side and considering these are OEM and they come with the grilles, I am asking $125 plus shipping. At that price, I'll throw in the connectors that I had to buy from the dealer and an OEM foglight switch so you can install them independent of the headlights if you want. I also have the pinout diagram of the oem switch (that one took some trial and error with the old multimeter to figure out). I installed it in the blank spot where the seat heater dial goes. You can see in the picture below (it's lit up green).

<img src="http://pictureposter.audiworld.com/101044/img_1099.jpg"><ul><li><a href="http://www.audiworld.com/tech/elec90.shtml">AW tech article</a></li></ul>