I was looking at getting a better cold air intake so I was looking at Evoms but I was looking and where does the connector/plug go that was attached to the top of the airbox?

Example: LLTEK puts theres basically right next to the grill? (It is at the bottom of the picture)

http://www.lltek.com/images/undahood/A4_B5_2pnt8_12valve_AIK_UH0012K_Z.jpg

<ul><li><a href="http://www.lltek.com/images/undahood/A4_B5_2pnt8_12valve_AIK_UH0012K_Z.jpg">http://www.lltek.com/images/undahood/A4_B5_2pnt8_12valve_AIK_UH0012K_Z.jpg</a</li></ul>

they said if the sensors get too hot they will "black out" then i dunno wtf will happen :P... proly some thing bad :(
So they told me to put it in the back so i just duct taped the things in the back...
The sensors were pointed inside the air box so the cool air current can keep the sensors cool..
without the airbox then engine heat can affect the sensors

It's the ignition output stage module, which is mounted on a heatsink for a very good reason. I suggest you mount it on another heatsink, if you relocate it. Don't break that part, it's expensive.