<IMG SRC="http://pictureposter.audiworld.com/8297/zex11a.jpg">
<IMG SRC="http://pictureposter.audiworld.com/8297/zex_stealth.jpg">
<IMG SRC="http://pictureposter.audiworld.com/8297/zex_switch_2.jpg">
<IMG SRC="http://pictureposter.audiworld.com/8297/zex_switch.jpg">

Didn't you want a small single switch cover?

It's in the mail.

to avoid that "oh ****" around traffic factor :P

Nice work though!

didn't you just add two more fog light switches instead? They have nice LEDs in them, and you can even change the color by exchanging the LEDs. I added one switch that lights up when the low beams comes on (the blue one), and two more that light up when the brake lights come on (the red ones). I was tempted to add a little electronic gadget (consisting out of a reed switch, a spool, a transistor, and a resistor, I think) that would have made yet another LED light up when a brake light bulb failed, but I was too lazy.

PS: All those switches are on only for the picture!

<img src="http://home.earthlink.net/~triphibious2/center_display.jpg">

'cause that's what I want.

Bare bones is fine, too.

I just didn't like the look of the empty switch covers in the dash. I also think it's ridiculous that the A4 does neither have a lit ignition lock, nor a regular headlight switch. Well, at least the newer models have a regular switch, I think...

About the brake light indicators: As I said, I was originally planning on adding a feature that would have monitored the brake light bulbs (standard if you have the multifunctional display option), but I ended up being too lazy to install it.

mount two LEDs in the blank switch cover.

how difficult to install, and what are your conclusions regarding this mod?