I know this has been discussed alot but I still have some unanswered questions after my search. My stock sides roll around the edges of my car making it difficult to fit the S4 sides on.
You can see this in this picture:
<IMG SRC="http://pictureposter.audiworld.com/10200/dscn0339.jpg">
I am considering trimming my stock sides down so that the S4 ones will fit. My question is, will this work or should I buy other door sills for my car (possibly from a newer A4 or even the S4)
Can I get ones identical to these minus the S4 wirting? (even with A4 on them would be fine)
<IMG SRC="http://pictureposter.audiworld.com/10200/dscn0350.1.jpg">
Here is a picture of Markbradford's install with Audi plates. Here it seems that the S4 skirt fits over the sills rather than fit under them like the S4 sills do. Will this (the Audi sills) cause drainage problems where water may pool or even get under the skirts?
<IMG SRC="http://pictureposter.audiworld.com/129/sideskirtsills.jpg">
What do you think I should do?
On a side note does anyone know the part number for the rear S4 bracket that the skirts attach to? (the one that sits on the bottom of the rear wheel wells) It's the braket at the right side of this picture: (I know Justdave posed part #'s before but I'm unable to find them)
<IMG SRC="http://pictureposter.audiworld.com/10200/dscn0343.jpg">
Thanks very much in advance!