PDA

View Full Version : On the 96 12v can someone show me where the engine coolant temp sensor goes

AEGA4
03-31-2003, 02:39 PM
MikTip
03-31-2003, 03:14 PM
<center><img src="http://pictureposter.audiworld.com/6607/switchz.jpg"></center><p>#3 is for the FI #7 if for the temp gauge
MikTip
03-31-2003, 03:17 PM
<center><img src="http://pictureposter.audiworld.com/6607/coolpic.jpg"></center><p>
MikTip
03-31-2003, 03:21 PM
<center><img src="http://pictureposter.audiworld.com/6607/rear.jpg"></center><p>
moribundman
03-31-2003, 03:45 PM
Since you seem to have everything on file, what coolant sensor is in the bottom of the expansion tank? I have had the connector fall off several times, but I never noticed any ill effect.
AEGA4
03-31-2003, 04:43 PM
MikTip
03-31-2003, 05:04 PM
It was used by Audi to give you a dash light when the coolant tank drops low. Some Audi's have the dash light, some dont. All Audi expansion tanks have the sensor, but not all Audi's will give you the light! ;O)
Dead
03-31-2003, 08:36 PM
No pictures?;-)
You're letting us down.
moribundman
03-31-2003, 08:39 PM
They put the wiring in but not the idiot light? Jeez...
Psssss
03-31-2003, 10:16 PM
Nice ride! Mine is under login:Psssss
MikTip
04-01-2003, 12:43 AM
Drain the tank, with the plug on, allowing electrical connection to ground, and I bet you get a light? ;O)
moribundman
04-01-2003, 07:55 AM
Bryans12v
04-03-2003, 02:41 PM
And when you find a post of his, click his sig and go into the "Tech" section. In there youll find the ICV write up, theres some good pics of it in there.