View Full Version : ahhh... new error codes...


Bvarghese
09-19-2005, 07:47 AM
He guys

Just had some more work done on my car inclduing

1) Replacing the fan clutch
2) Replacing the CV boots
3) Replacign the entire set of control arms and tie rod ends

and i have to tell you it drives lie a dream.

although when i got the car the the red "fault in brake system light" continues showing.

Then today morning while i was driving to work the transmission started acting funny. The RPM would drop automatically while i was accelerating and then resume. So i stopped the car for a while then then tried it again... it was gone... adnyone experienced this before... is this what you guys call transmission hunting?

So i did a scan with VAg and below are the results

VAG-COM Version: Release 311.2-N


Chassis Type: 4D - Audi A8 D2
Scan: 01,02,03,08,15,16,17,35,36,37,45,55,56,65,76

Address 01 -------------------------------------------------------
Controller: 4D0 907 557 J
Component: 4,2L V8/4V MOTR AT D01
Coding: 03263
Shop #: WSC 02314
No fault code found.

Address 02 -------------------------------------------------------
Controller: 4D0 927 156 E
Component: AG4 GETRIEBE 018 D40
Coding: 00000
Shop #: WSC 00000
1 Fault Found:
00293 - Multi-function Switch (F125)
05-10 - Input Open - Intermittent

Address 03 -------------------------------------------------------
Controller: 4D0 907 379 L
Component: ABS/EDS BOSCH 5 7680
Coding: 0265109043
Shop #: BB 37680
1 Fault Found:
00285 - ABS Wheel Speed Sensor: Front Right (G45)
30-00 - Open or Short to B+

Address 08 -------------------------------------------------------
Controller: 4D0 820 043 C
Component: D2-KLIMAVOLLAUTOMAT_D03
Coding: 00180
Shop #: WSC 02314
No fault code found.

Skipping Address 15-Airbags

Address 17 -------------------------------------------------------
Controller: 4D0 919 033 K
Component: D2-KOMBIINSTRUMENT__D21
Coding: 00183
Shop #: WSC 01588
No fault code found.

End -------------------------------------------------------

thanks guys

Advanton20s
09-27-2005, 07:56 PM
Did you find the problem with code 00293? My tranny has been shifting hard and hesitant to shift out of 1st. Vag Com showed same code.

JoeVane
09-30-2005, 12:19 PM
Your problem could be a dirty Abs Sensor, try cleaning it first and see if the code clears...

Good Luck<ul><li><a href="http://www.audipages.com/Tech_Articles/susp_whls_brake_steer/abstroubleshooting.html">Link...</a></li></ul>