Or, is there a glossary/database of code defintions that i can reference against?

My car is an Audi A4 2000 1.8T (GIAC). My PC is an IBM Thinkpad R50 running Windows XP Pro SP1. Interface is KEY-USB. Running VAG-COM 504.1-UD.

thanks!

Address 35: Centr. Locks

Controller: 8L0 862 257 N

Component: CV-Pump D11

Coding: 16140

Shop #: WSC 06335

5 Faults Found:

01367 - Central Locking Pump Run Time Exceeded (Likely Leak)

35-00 - -

01372 - Alarm triggered by Door Contact Switch; Passenger Side or Rear

35-00 - -

01370 - Alarm triggered by Interior Monitoring

35-00 - -

00955 - Key 1

09-00 - Adaptation Limit Surpassed

00956 - Key 2

09-00 - Adaptation Limit Surpassed

AFAIK, the 2 regarding the keys only mean that the key was pressed too many times while being out of range of the car (for example, when you press it a couple times while walking to the car, but you are just a little out of range and it doesn't work). The others just mean the alarm went off (the interior monitor sets my alarm off alot if I just leave the windows down on a windy day), so I wouldn't worry about them either... unless you find thing missing from your car that is ;-)