I am in dire need of some instruction to remove and install my head. Waterpump failure resulted in vaulve slap etc. I have a local guy with rebuilt heads (ramcyclinder.com), but I dont have a write up on how to do it. Looking for local help or local Bently Manual for rebuild instruction.

<center><img src="http://pictureposter.audiworld.com/113022/img_1327.jpg"></center><p>
Take your time and label everything as you remove it. Keep bolts and nuts in plastic bags and label them as well. You just need to look at the head and what is around it and start removing everything that is in the way. Let us know if you have any specific questions or issues along the way.

slicks are on my stock wheels and all seasons are now on my miglia's. Of course they haven't had much use lately as the S4 has been down for a few weeks for modding. I should have it back Friday. I just hope I finish before it snows!