Brand new to the forums,wondering if any one in the Minneaplis area owns the cam locking bar,and is willing to lend ,rent,barter.Need to replace the TB,would rather not have to purchase the tool at cost.

<center><img src="http://pictureposter.audiworld.com/15643/pict3090.jpg"></center><p>KIDDING....it is just off in this picture

I rented mine from blau parts.....pretty reasonable, and they were quick to retrn the tool deposit fee

Just make three marks on the pulley and belt at each cam and crank. Then count teeth to transfer the marks to the new belt. That way there is absolutely no guess work. I have done it using this method several times.

<img src="http://pictureposter.audiworld.com/64191/30v_cam_bar_blueprint.jpg">

I've caught so mush sh*t from other AW peeps for using this method . The belt indexing method works fine, they just can't accept it.