Turn signals went to crap today and Im headed out the door to go get a replacement from Jim Ellis <[shivers]> because they are the only place open that carries it.

Any takers?

Thanks in Advance!

It was a simple swap....easier than replacing the relays on my old 200 (if i remember correctly). The kenobi write up told me everything i needed to know but had pictures with the radio out so I thought i had to pull the radio, but that is not necessary.

Anyway, i did have one struggle - getting the hazard switch not to 'stick'. If i pushed the switch all the way back, it would put pressure on the switch mechanism. So i had to slide the unit in 90% of the way and then pop the trim back on. The button is still a bit 'sticky' but I dont use the hazards much anyway.

mine went crapola so i need to replace it before the authorities give me chit.

http://forums.audiworld.com/s4/msgs/1783172.phtml
Ignore the fact that the radio is out in his pics and

- just use a small (very small) straight-blade screwdriver to pop the trim off (from the bottom, then sides).
-Use needle-nose pliers to yank the broken one out.
-Plug in the new one, test it, slide it in 90% of the way, push the trim back on.

Part Number (for B5's at least) 8D0 941 509 H 01C
Price $31.65 pre-tax

<center><img src="http://img.eautopartscatalog.com/live/P3030133175OES.JPG"></center><p>