<center><img src="http://pictureposter.audiworld.com/76654/ken_dyno_18lbs.jpg"></center><p>
In the lower left are the notes but it's pretty small to read, here's what is says:

DYNO NOTES
-18.65 PSI Max Boost
-92 octane
-5500 RPM Test
-3rd gear
-60% parasitic loss

*Dip in graph caused by incorrect spark plug gap "flameout"

Gonna regap the plugs and turn boost up to about 20 psi and see if I am still getting the hesitation on WOT. If we turned the boost down the dip goes away, I have another pic in my poster of a lower boost dyno that is much smoother.

Comments/questions welcome.

The reason I ask is that when we run your car on the Gtech RR, would be nice to do an overlay graph.

Bruce

I don't have any clue about what raw data plots look like from the dyno. I was just asking the question if you want to compare dyno vs RR with the same exact configuration (MBC, boost, etc). When do you think you will be ready for RR testing?

Bruce

Right now wouldn't work for me. I work near Boeing field, but live in the south end (Federal Way). Where are you located? (360) looks like Snohomish county or north.

Bruce