for anyone that wants to help me install mintek red box for the front and rear. 01.5 A4 I live in woodinville
thanks
brad

not working these days so I've got some free time to kill! do you have all necessary tools?
RBT

I guess I'll just take it in and have it done.

Thanks anway

which is probably better at applying the pressure needed. these are obviously cheap to pick up.
How are your current pads? your car seems relatively new so I'm guessing they're still 'thick'. this makes for an easier swap as the caliper won't hav to be retracted too much.

Search the '02 forum for the details of the discussion.

Sounds barbaric but this does work in a pinch. Big C-clamp AND a pair of channel-lock pliers. Tighten the clamp's screw end against the piston and turn the piston with the channel locks. Then repaeat the process until the piston is fully retracted. Be careful not to tear the dust boot. Or go buy the tool, whatever works. Good Luck

it has the teeth in it to spin and push the piston in.

<ul><li><a href="http://forums.audiworld.com/a4gen2/msgs/161708.phtml">http://forums.audiworld.com/a4gen2/msgs/161708.phtml</a</li></ul>

oh dont forget to to uncap the brake resv. in the engine bay to help relieve press off the rear calip. cylinders when twisting them back in or pushing them back in!!