View Full Version : Remember my dash which I kindly modified/lighten with a hole saw...


Jet Jockey/A4 Pilot
01-27-2008, 08:59 PM
This one! LOL.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-Weightreduction-Jan052008012.jpg">


Now it looks like this.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20080.jpg">


Remember this.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-Weightreduction-Jan052008011.jpg">


Now it looks like this.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-4.jpg">


We test fitted it in its proper position and this is what it looks like once in place. Note: The centre defrost vent is not installed yet however you can see the small defrost ports on the leading edge of the dash. I kept most of them in place the ones on the right side were removed.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-1.jpg">


Here's another view from the right side. You'll notice no centre vents and no side vents.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-2.jpg">


A look at the cluster location. Again no side vent for obvious reasons.

<img src="http://i17.photobucket.com/albums/b79/mlab601/CAR-ModifiedHVACInstall-Jan27-20-3.jpg">

eltonsi
01-28-2008, 04:31 AM

Jet Jockey/A4 Pilot
01-28-2008, 05:11 AM

DB/S4
01-28-2008, 09:09 AM

northof49(+1+1)
01-29-2008, 07:44 AM