You know... i've looked at so many new cars, thinking "i need to get rid of that cursed a4" but then one fact comes hitting me in the face.

Fvck the b5 is hot!...

just detailed :) now to PW in a few forums


<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2306.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2310.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2311.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2314.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2315.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2319.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2326.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2327.jpg">


<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_2330.jpg">


Special thanks to brian@avalon.. hooked me up on a killer deal for the mesh tha makes my front look good + the rear is from him too.

Now i just need to get my new wheels here... =)

hey,
do you think i could email you a question about dealership policy?

And I noticed that you removed the lower door moldings, looks nice. Was it difficult to do either of those mods? Because I was thinking about doing the same thing.

Btw what wheels are you getting?

the bumper went as followed
<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_1163.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_1167.jpg">
my roomate was pissed during this stage.. (who needs a kitchen table anyways?)
<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_1188.jpg">

<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_1187.jpg">

then i had it painted... got the mesh from brian @avalon motorsports
<img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_1355.jpg">

the lower door molding was a b!tch... but you have an s4... i would suggest keeping yours. You have to grind down the little tabs (you'll know what i mean when you remove the molding).. then make them smooth.. paint them with whatever colour.. just to ensure rust doesn't get in there.
Then go to trim-gards website. Find a dealer... find the "euro molding".. it comes in a roll.. cut to length.. voila!

the wheels...
hmm.. i really shouldn't say :) They'll be quite the surprise

just sayin

as soon as i put them on