View Full Version : Fog Light refit


PhAzE
01-28-2004, 10:37 PM
Hey, I've got a 98.5 A4 2.8L

Wondering if it was possible to go to an Audi dealership to get OEM foglight/driving lights installed. Anyone know how much this may cost if possible? Anyone know any alternatives? By the way, I've seen a foglight kit on LLTeks site, if I upgrade with these, will these be able to be mounted on Rieger RS4 front bumper kit?

Ed@mtl
01-29-2004, 09:30 AM
Was wondering if someone can take some pictures of how it's mounted. I don't want to see the black plastic cover that goes over the fogs cause I know how that's installed. I would like to see some good pictures of the actual fog lights...

Please...

Ed@mtl
01-29-2004, 01:31 PM

Kirk
01-29-2004, 02:12 PM

Nikos18Tq
01-29-2004, 06:00 PM
<center><img src="http://pictureposter.audiworld.com/4197/picture_0147m.jpg"></center><p>It's not mounted as you can clearly see but it gives you an idea.

Later,

audifirst
01-30-2004, 01:03 AM
I did retrofit OEM fog lights to my ex 97 front bumper, I had to make my own brackets to mount them to bumper, I used aluminium cut them to pieces and used self tapping screws ,
easier way would be to get bumper out of 99.5 and up A4 but it would be expensive task, the other alternative is get fog light kit from LLtek or PG performance it is in range of 300 cdn but it save you time and aligning it...

if you planning to mount to aftermarket bumper I would get fog lights from CDN-tire cheaper and manufacture your own brackets...

Ed@mtl
01-30-2004, 12:15 PM
how it's mounted.

Nikos18Tq
01-30-2004, 12:52 PM