As much fun as we had yesterday, this kinda bumms me out. I have no problem letting everyone come on over and use the tools, but a lot of things have gone missing...

16mm box end wrench
14mm box end wrench
13mm box end wrench
11mm box end wrench
7mm box end wrench

small and thin Craftsman standard head screw driver, clear handle/with blue and red on it

3/8" drive socket wrench with 3" extension and 6" extension
1/2" drive socket wrench with 3" extension
-----those are expensive replacements, so please, please get those back to me...ASAP as I have urgent need for them this week!!! All I have left is my 1/4" little dinky socket srench....makes it hard to so sways on an allroad and other work without them.

Sockets:
10mm 3/8" drive, 6point
16mm 3/8" drive, 12 point
17mm both 3/8" and 1/2" drives, the 3/8" drive was the deep socket teh 1/2" was a 12 point, the 3/8" deep was a 6 point. I can not take off wheels without those...also VERY important that I get those back ASAP!!!!

A leatherman

and a battery to my Dewalt cordless drill...god only knows where that could have gone

As far as I can tell, that is it for now, I have done complete look throughs of all the drawers and all over the floor and outside, and after about 3 hours of sorting and cleaning, this is what i have come up with.

All my tools are craftsman, so if you grabbed them by mistake, please get them back, I will even come pick them up if need be...i need them real soon.


No issues if they are grabbed by accident, I just want them back, no questions asked.

cheers
jon

Man, sorry to hear that Jon, hope the missing tools are found and returned soon. Thanks for letting all of us come over to your place, I had a great time.

Jonathan

hope it was all "accidental"

I just need them back for work I had planned this week on other people's cars...

and get a lift, and community tools, a wharehouse so we have plenty of covered garage space...

ahhhhhh...one can dream, can't we :-)

cheers
jon

lets open shop!

missing pieces too, not sure on the details but i'll double check on mine tomorrow and let you know
and i just realized i left the epoxy set that the guys using for the clear corner mods on your garage, forgot to pick it up
hope you'll found all your tools man!

I don't think Andy would have needed more than the original battery. He only needed it to drill a coule holes in the fender liner.

I know I don't have any of those, but in the mean time, if you need to borrow some of my tools to get you through the work you have planned this week, let me know.

Thanks again for hosting us, it was a really good day. I hope your missing tools turn up soon.

<center><img src="http://www.detailersparadise.com/_System/_AdvancedStore/@Engine/BinaryWrite.asp?Key=891120031253162-1225212614010&amp;Type=891120031253162%2D1225212614010 2"></center><p>Just give me a call if you need them. 303-722-5107.

What's funny (not like Rita Rudner funny) Jon is you have a Garage Day and stuff ends up missing. Winston has one and he ends up with all sorts of stuff at his house ;)

We all know everyone and when there is a lot going on things get mixed up. Hopefulyl everyone that was there has seen this and will get the tools back in time for the next poject.

I'm only sorry I couldn't stay on Saturday, and I apologize to anyone that thought I was brushing them off or just ignoring them. Too many things going on. :)

Oh yeah, where's the brake bleeder end up?

I have heard nothing but good things about your from Pat and some of the other guys from Audiworld and RMCB5...you will have to come hang with us sometime and show us some tricks...I am sure it will further drum up business for you.

If I need them, I will give you a call...nice of you to offer even though we have never met.

cheers
jon

I will get it back to you once that is done.

and that's too bad! Matt was the main reason for it being there!!! Ha, ow well, seems like something like that always happens to us on Garage Days.

I'm not worried about where it ended up, I just didn't want anyone turning it into a bong. :)

i lost 17 mm 3/8 deep socket that i use to replace my wheel and torx key set (the ones that has a utility knife package - damn! this one is my friend's that i borrowed)
and i checked the set that i have to make sure somebody didn't misplaced yours on mine, i got mine marked
hope you'll find yours!

I am still missing both 17mm sockets and the large 1/2" socket wrench with the 3" extension...as well as the battery from the drill, there were 2 of them, and my small craftsman screwdiver which was part of a set. the only box end wrench that is still missing is the 14mm

All other tools were returned by 2 other people today, so that was good...but I still really need the large wrench and those sockets and extension. The battery is not that big of a deal, I had 2 of them, but when one goes out, I am dead in the water.

thanks to everyone for checking, it really means a lot to get most of the tools back today.

cheers
jon

PS...Dave from RMCB5 is missing an adaptor socket, I believe it was 1/2" to 3/8" or something like that. I have no adaptors, and we checked through everything, so keep your eyes open for that....

I changed plans for Nancy's suspension until next week...so there is more time to have the big wrench show up or I'll just replace it.