I was thinking of getting just the MTM springs with the stock shocks. But i'm wondering if it will be low enough. I don't want it too low i want it to look wise and clean. I'm getting 19's.

I don't want it to be too aggressive. I want it to ride almost like stock. EVen thought MTM says these springs are designed to work with the stock springs do you think it will be low enough(clean) and not slammed for 19's rims?

<center><img src="http://www.hoppenmotorsport.com/S4_Springs2.jpg"></center><p>

He has Eibachs. His car sits almost perfect, a little high for my taste, but then again, my taste is looooowwwww.... &lt;read 24.75" all around&gt;)

Plus it's not the best for the suspension geometry.

<center><img src="http://pictureposter.audiworld.com/56877/mclaren.jpg"></center><p>

A 235/40 18 is going to be larger in diameter than say a 215/40 18. If both cars are the same distance from the ground to the fender, the SUSPENSION on the car with the 235 series tire is actually sitting lower (IE closer to bottoming out).

215/40 18 = 24.771" diameter
235/40 18 = 25.401" diameter

No way in hell you're running 24.75", not with those meats.

I'm talking about the car (Front bumper, Exhaust, etc) hitting the bottom of a speedbump for example. If your lower control arms are hitting pavement you've got a much bigger problem.

Unless the S4 bumper and shroud sit lower than an A4.