04-24-2008, 08:53 PM
<center><img src="http://pictureposter.audiworld.com/125270/pict0008.jpg"></center><p>HELP! I am still messing around my ICV hose routing. Have not had a chance to get to it since been busy working. Now I have a chance to get the rig on the road, this little issue still has me stumped. Can somebody tell me if I have the IcV on correctly and where the pre molded 3 way rubber hose gets routed to? Any assistance is greatly appreciated. Thanks.
04-25-2008, 04:46 AM
The angled part of the tube gets plummed into the side of the intake manifold (bung is visible in picture, just to the right of the CSV).
Other large port goes to the ISV. There will be a few other smaller coneections, they are under kinda naer the airboot/throttle body. Should be easy as they shuold be the only 2 hoses left to connect.
04-25-2008, 10:09 PM
Thanks guys! I will get to it this weekend. Great information!
04-28-2008, 01:42 PM
Finally got it. The 3-way hose was attached in the opposite end that's why it was pointing the wrong way. I will upload pictures soon. Thanks for the response.