Decided to get a few things done today. Installed the Urq injector cooling fan bracket, hardware, wastegate shield and temp sensor, as well as the injector cooling fan shroud. Everything went in with ease for the most part. I went to put the fan on the bracket and try and hook up the flex tube to the snorkel that comes off the fan motor, but it doesnt fit. Looks like I need the Urq snorkel too! I did buy an Urq flex hose, which was dirt cheap.

<img src="http://pictureposter.audiworld.com/21806/injectorfan_002.jpg">

<img src="http://pictureposter.audiworld.com/21806/injectorfan_004.jpg">

The wiring and vac lines at the rear are a mess :).
Other than that, its ok.