I have a line on a used, but very good condition non-airbag S2 sport steering wheel. Hub is PN 893 064 706 b which I
think is for Euro S2/CQ/80/90, correct? Anybody know what, if any, modifications I may have to make to put this on my 87 CGT? I LOVE the look of this wheel, and really want it. Right now I have a leather wrapped wheel of a 5000 in it. I had to pop the hub out of my old stock wheel and put it on the 5K wheel, but it fit perfectly. Would I have to do this to the S2 wheel? or is it a bolt on? Would my stock CGT hub even fit this wheel? Ekk! I SO want this wheel....

<center><img src="http://www.karquattro.com/Coupes/0231/0231f.jpg"></center><p>It might just bolt in, but Audi's are never that simple...

The later typ-44 100/200's had the same 4 spoke wheels as the 80/90s. I assume that Audi didn't redesign the steering wheel hub and that the wheels from those two cars are compatible.

If the splines turn out not to be compatible, it would probably be easier to fabricate your own mounting bracket using the existing hub than to do the hub swap.

Here's a pic of the Sport wheel. It's basically the same as the S2 wheel only it doesn't have the S2 badge. Later model S2's had an airbag wheel that is identical to the 3 spoke airbag wheel on 1996-2001.5 A4's.

<center><img src="http://www.euro-audi-parts.com/3spokea.jpg"></center><p><ul><li><a href="http://forums.audiworld.com/9080/msgs/108002.phtml">http://forums.audiworld.com/9080/msgs/108002.phtml</a</li></ul>

so it can fit the cgt/4k, but none for the s2 wheel.