10-09-2001, 12:59 PM
I have a 87 4000csq and the clutch slave cylinder went the other day. Well i started to try and replace it today and i cant get the lock pin out of the hole so i can pull out the slave cylinder. Anyone have any suggestions.
10-09-2001, 02:08 PM
You need to get a punch, or an item which fits inside the hole, but is not small enough to fit inside the pin. One which fits inside the hole,
snug. The pin is often rusts in there.
I had a special bolt, about 3 inches long I used for this purpose.
It may be damaged and you might have to get creative!