17 years... and the original exhaust has finally rusted out. anyone know if there's a universal fit for a replacement? Or do I have to spring for the stock part?

Will send you email on the topic.
If your 91200TQ is a 20Valve, then the Stromung is a bolt up for the Sedan..

Some mods required for an Avant.

This was originally developed for the C4 chassis, and then we discovered the fitment to the 200-20V sedan was identical.

Can't say much here because Stromung is not an AW advertiser..

YGM!

Thanks for the lead JurQ ~!

Posto@comcast.net

Could you please e-mail me with the info on the group-buy also :) ?

Sure coming at ya'

posto@comcast.net

Read all this stuff please.
http://forums.audiworld.com/v8/msgs/119798.phtml
JP

Thanks very much
dwanca@att.net

The flanges on my down pipes are four bolted as well. Does Mystified's car have a new single downpipe system to take the place of the stockers or am I missing something, (maybe I should have quit smoking in my twenty's ;+D )

I'm in if it's under $1k

I seem to recall these were around $1500.

Hey Jeff, What's a downpipe and center section going for these days?

Thanks Buddy I get it now ;+>

Hi Chad.

This is not a stocking situation, so I have to line up full system sales first.
Stromung prefers this until the majority of production is burned off.

GT series turbos now?