Hi I have a '91 100 with power leather seats and I am trying to remove the rear net plastic cover on the buckets. My problem is the wheel lumbar adjuster, does anyone know how this is supposed to pop off or remove? Thanks everyone.

No BTDT, but the parts catalog says there's a bolt holding the lumber adjuster knob in place:

<img src="http://www.vagcat.com/p/B087/147000.png">

I'd guess the bolt is covered by something. On my 200s, there's a round cap that probably has to be pulled off with one of those pick tools similar to dental picks.

The image shows screws holding the net to the back of the seat, but I can't see anything like a screw on my 200s. Maybe the plastic trim bar at each side of the net slides off????

Thanks for so much the pic... Yes I thought the cap on the lumbar wheel had to come off because I felt around inside and noticed the bolt. Your probably right I need some sort of specialty tool to get to the bolt. I believe there are screws holding the net in but I think they also hold the plastic back to the chair itself. Thanks so much for you insight I appreciate it.

Greg