for a 1986 to 1988 5000 Turbo or 5000 Quattro Turbo. Can anyone help?

TIA!

Jewel

I have a book with the diagrams for those years, what do you need?

everything that comes out of the ecu/computer :)

my nick is Jewel is all

can you scan and email it? or do you have to copy it?

TIA!!!

Jewel

so you want the page listing everything that goes into the ecu? I'll look ok.

the wiring for an 86 is different than the 87 and 88. which do you need?

It doesnt list everything at once. It has a section for each system on the car. Which equals about 50+ pages! Is there any system in particular that you need wiring for? by the way why do you need a list of all the wiring? just curious.

Adam.

The main wiring harness coming out of the computer. There are 21 wires that go across the inside firewall to the fusebox and gauges and those are the ones I need to know where they go. We put an 86 5k turbo motor in our UrQ and the wiring harness needs to be replaced with the one from the donor vehicle. All the wires that go through the firewall have the connectors on them but the strand (21 wires) that goes up under the dash was cut when the harness was removed. I hope this makes sense and narrows it down to a few pages.

Thanks again


Jewel

It shows the fuse/relay panel. It lists what every fuse is for, but it doesnt give any colors for the wiring? I think you might need your own bentley manual for this one. Thats what I have. do you have access to one? Go to the library and lookup everything in the Mitchell wiring manuals. Do'nt even bother with the Chiltons, thier **** when it comes to wiring. you could also ask someone on the URQ forum who has done this swap, and how they did the wiring?

sorry I cant help any further:(

Adam.