View Full Version : Scored a bunch of odds and ends at the salvage yard today.


turbos4audi
11-28-2008, 01:59 PM
<img src="http://pictureposter.audiworld.com/146834/imgp0659.jpg">
All out of a 100.

<img src="http://pictureposter.audiworld.com/146834/imgp0670.jpg">
Left to right: Trunk lid carpet screws, headlight washer pump, trunk lock cylinder nuts, tail light nuts, 329 relay, IC bulbs, trunk lock cylinder gasket. throttle cable clip, door trim clip, license plate lights, brake res. cap, coolant res. cap, cig. lighter bulb, teeth for parking brake and three middle door trims it excellent condition.

I am going togo back for more later on.

UrS4boy
11-28-2008, 02:31 PM

sk88erguy
11-28-2008, 02:31 PM
if its the same as ours.

turbos4audi
11-28-2008, 02:37 PM

turbos4audi
11-28-2008, 02:38 PM
Or I can get a price first and let you know.

EDIGREG
11-28-2008, 02:42 PM
Going to the garage tomorrow and could pull them for you if you're interested...

kinderutz
11-28-2008, 02:43 PM
bollocks!

turbos4audi
11-28-2008, 02:47 PM
that they were complete. NO ONE drives Audis down here and everyone thinks I am loaded because I drive one : )

Go to MA, NH or VT and they have a whole section for them, BUT they are not open yards. Booo to that.

Sloooo4esT
11-28-2008, 02:54 PM
it works in place of your front drivers door light panel and gives you the option of having the light turn on when you open drivers door.

turbos4audi
11-28-2008, 03:16 PM
My switches popped off on 2 of them. The little tabs broke.

UrS4boy
11-28-2008, 03:21 PM

UrS4boy
11-28-2008, 03:22 PM

sk88erguy
11-28-2008, 04:38 PM

turbos4audi
11-28-2008, 04:54 PM

oliwer78
11-28-2008, 06:32 PM
Unfortunatelly, there is nothing for free. However it's good to have such a source of bolts, nuts and others.
Most of the y/j over here don't allow to get to the yard in person, this one does. :)

c4S6
11-28-2008, 07:05 PM

turbos4audi
11-28-2008, 07:13 PM

marvgomez
11-29-2008, 06:41 AM

turbos4audi
12-02-2008, 07:03 PM
<ul><li><a href="http://www.034motorsport.com/product_info.php?products_id=774">034 Throttle Cam</a></li></ul>

froseph
05-03-2010, 09:14 AM
<ul><li><a href="http://www.034motorsport.com/product_info.php?products_id=774">034 Throttle Cam</a></li></ul>

Just curious to know what people decided upon to fix the busted plastic piece. Looks like Darren went a custom approach and used a metal clip across the cable channel. How exactly does the cable mate up with SS 034 piece? Does it just use the steel nipple at the end of the cable?

I tried a junk yard in Indiana a couple years ago, but all that was there were 3B 20V that didn't have what I needed. It's too bad nobody offers an aluminum direct substitute for that black plastic piece attached to the cable. I've been surviving on zip ties for quite a while now.