I made a little over 330hp with a 3071 on Tony's Mustang Dyno, going back 'for more' on the 29th..

I traded some e-mails w/ Tony and looks like I'll be riding your coat tails w/ my Avant.

I'm sending my EM/DP and wastgate out for some heat coating. Did you send your WG out apart or together? Also, who'd you use? Thanks.

<center><img src="http://pictureposter.audiworld.com/55085/p7180026.jpg"></center><p>I used Electro Tech Powder Coating. Recommended to me by Darin Nederhoff and Frank Amoroso. I have to say, it turned out amazing and they didn't over charge me by any means. Talk to Adam there, he's real nice and will do everything to make sure your engine parts turn out the way you want :)

Hope that helps!<ul><li><a href="http://www.electrotechcoatings.com/">http://www.electrotechcoatings.com/</a</li></ul>

and Dave L did 317 on 94 + toluene. This was on a Dyno Dynamics.

I was running the less agressive MRC RS2 software. Sean was running Dahlback MTM and Dave L. was running "Pingmeister"(tm) chips, lots of timing advance = lots of power, but he can only do that running toluene.

In retrospect, I think I had a punky 1.8t 115L coil.