Audi Original "S" Cars Discussion forum for the Audi Audi Ur S4, Ur S6, S2 & RS2

Fault code help!

Thread Tools
 
Search this Thread
 
Old 03-02-2006, 06:53 PM
  #1  
Audiworld Junior Member
Thread Starter
 
S8abmw's Avatar
 
Join Date: Sep 2004
Posts: 75
Likes: 0
Received 0 Likes on 0 Posts
Default Fault code help!

Hello collective S minds,
Just finished head gasket/timing belt. Previously no check engine. Fire up and check engine light. I get one or both of these codes. 00523 intake temp sensor, open or short to B+.
00533 idle regulation adaptation limit exceeded.09-00 adaptation limit surpassed. Clear codes, start engine runs fine for 30 seconds, then engine light comes on and idle jumps to 1100 rpm. The car runs well otherwise with full boost. Took out sensor inspected and cleaned, also cleaned ISV. Any ideas?
thanks,
Dave
Old 03-02-2006, 07:19 PM
  #2  
AudiWorld Super User
 
kday's Avatar
 
Join Date: Nov 2003
Posts: 5,277
Received 14 Likes on 9 Posts
Default You have the connectors for the ISV and the IAT sensor swapped...

You aren't the first person to do this. I remember someone posting about this not too long ago.
Old 03-04-2006, 03:29 AM
  #3  
Audiworld Junior Member
Thread Starter
 
S8abmw's Avatar
 
Join Date: Sep 2004
Posts: 75
Likes: 0
Received 0 Likes on 0 Posts
Default

Man, I am dumb! Sometimes the easiest fix is the hardest to figure out!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fe342185
A6 / S6 (C6 Platform) Discussion
2
07-23-2017 01:13 PM
DoubleA4
Audi allroad
7
01-15-2014 06:29 PM
rhsnyder
A4 (B6 Platform) Discussion
6
12-27-2008 01:21 PM
shehatezme
A4 (B5 Platform) Discussion
1
08-20-2003 03:17 PM
KenThib
Audi 100 / A6 (C4 Platform)
8
02-12-2002 08:36 AM



Quick Reply: Fault code help!



All times are GMT -8. The time now is 10:27 AM.