woohoo, my 1.8t coil conversion parts came in!
#1
AudiWorld Senior Member
Thread Starter
Join Date: Dec 2003
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
woohoo, my 1.8t coil conversion parts came in!
and the best part?
<img src="http://www.theswansonfamily.us/modules/gallery2/d/32822-1/IMG_0364.JPG">
I figured for $179.57 you really cant go wrong. Looking forward to getting my top end power back and banish the igniton miss deamons from das wagon.
<img src="http://www.theswansonfamily.us/modules/gallery2/d/32815-1/IMG_0360.JPG">
<img src="http://www.theswansonfamily.us/modules/gallery2/d/32822-1/IMG_0364.JPG">
I figured for $179.57 you really cant go wrong. Looking forward to getting my top end power back and banish the igniton miss deamons from das wagon.
<img src="http://www.theswansonfamily.us/modules/gallery2/d/32815-1/IMG_0360.JPG">
#3
AudiWorld Senior Member
Thread Starter
Join Date: Dec 2003
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much were your coilpack connectors? what are you using for POS plugs?
coilpack connectors: $7.99 each
For the POS plugs I bought the tail light connectors that Dave spec'd in the PDF. $3.82/each.
For the POS plugs I bought the tail light connectors that Dave spec'd in the PDF. $3.82/each.
#4
Er, Marc, I hope you saw the female pin number change (141 instead of 133 A) from about...
two weeks ago. The 133A pins do work, they are just a MF to push in. The 141 pins are (apparently) easier.
Apologies if you missed it.
(I need to redo and remount the pdf).
Apologies if you missed it.
(I need to redo and remount the pdf).
#5
AudiWorld Senior Member
Thread Starter
Join Date: Dec 2003
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: Er, Marc, I hope you saw the female pin number change (141 instead of 133 A) from about...
doh.
missed it, but no bigge. I already pushed the pins in, and yes.. it sucked. I messed up one of them as its in a little crooked but its not going anywhere and it contacts the pins fine so I'll leave it.
so ya, update that pdf when you get a chance
missed it, but no bigge. I already pushed the pins in, and yes.. it sucked. I messed up one of them as its in a little crooked but its not going anywhere and it contacts the pins fine so I'll leave it.
so ya, update that pdf when you get a chance
#6
In my defense, I did post to AW and audifans as soon as I was told about this. Too bad..
you missed it.
Like you said, not easy to load into the connectors but the 133A's do go in.
Dave F.
Like you said, not easy to load into the connectors but the 133A's do go in.
Dave F.
Trending Topics
#9
AudiWorld Senior Member
Thread Starter
Join Date: Dec 2003
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
sure (BWW)
because I'm lazy, here's the full size shot of the invoice
<img src="http://www.theswansonfamily.us/modules/gallery2/d/32817-1/IMG_0361.JPG">
just make sure you use the 141 instead of 133A as Dave mentioned for the pins.
<img src="http://www.theswansonfamily.us/modules/gallery2/d/32817-1/IMG_0361.JPG">
just make sure you use the 141 instead of 133A as Dave mentioned for the pins.