RE: Is the subframe bent???....
#1
RE: Is the subframe bent???....
When I removed the subframe, I flipped it and layed it on the garage floor in the exact mounting position but inverted. As it lays on the floor, I see that one of the four mount points does not lay flush with the floor, it's elevated about 1".
Question, is the subframe geometry made with a slight bend?
Question, is the subframe geometry made with a slight bend?
#3
The rear passanger transmission mount is around 1" higher
<center><img src="http://pictureposter.audiworld.com/53665/dsc01526.jpg"></center><p>Inverted this will cause it to sit uneven on the ground... see pic
HTH
HTH
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
huwla
S4 / RS4 (B5 Platform) Discussion
10
12-12-2005 09:14 AM
zeems
Audi 90 / 80 / Coupe quattro / Cabriolet
10
12-16-2004 01:11 PM
NickS
S4 / RS4 (B5 Platform) Discussion
4
06-06-2002 12:35 PM