The Eibachs need a 13mm spacer in the back to look right. ECS says the spacer is designed for Bilsteins. Will it also work with Konis?

I heard about them spacers too.Will I need them?

Will they work with stock springs? I'm considering just doing the Konis and a larger rear sway bar on my Avant to maintain the ride height for snow/gravel.

-David

you will need spacers. I think it was the older generation eibachs that were a little taller that requires no spacers..

Search google and you would be surprised that some shops out there still have them.. I did! :)

Good luck.

I've tried this on a 1997 UrS6 Avant.

Suspension ??
<img src="http://pictureposter.audiworld.com/21801/p7140002.jpg">

A minor oil leak :)
<img src="http://pictureposter.audiworld.com/21801/p7140003.jpg">

New yellow Koni almost there..
<img src="http://pictureposter.audiworld.com/21801/p7140004.jpg">

Do you know what compression/rebound settings you're using with the stock springs? I'm definitely considering this, since I do a fair amount of driving on rutted gravel roads, and in snow. I also drive aggressively on switchbacked mountain roads and want a well-controlled ride.

I've got a big trip in mid-March, hope the GB comes through in time. Also have MRC Stage 2, SAMCO, and Stromung on order; I'm on the slippery slope!

-David